Using The Refrigerator - Dometic DW6 Instrucciones De Uso

DW6
➤ Connect the plug of the DC connection cable to the socket on the back of the
refrigerator.
➤ Connect the DC connection cable to the DC power supply.
6.4

Using the refrigerator

A
NOTICE!
Food should be stored in its original packaging or in suitable containers.
➤ Press the POWER button for 3 seconds to switch on the refrigerator.
✓ The display (fig. 4 3, page 3) switches on and shows the current cooling
temperature.
➤ Press the POWER button again for 3 seconds when you want to switch the
refrigerator off.
✓ The display switches off.
➤ Press the LIGHT button for 3 seconds to switch the interior light on or off.
Setting the temperature
I
NOTE
The cooling performance can be affected by:
 The ambient temperature
 The number of bottles to be cooled
 The frequency with which the door is opened.
➤ Press the TEMP – button to reduce the cooling temperature in increments of 1 °C.
➤ Press the TEMP + button to increase the cooling temperature in increments of 1 °C.
✓ The set temperature appears on the display and flashes twice. The current interior
temperature of the refrigerator is then displayed.
Storing bottles (fig. 9, page 6)
➤ Place the bottles horizontally on the grid shelves.
➤ Place a maximum of two bottles on a shelf.
➤ Make sure that the bottles do not exceed the maximum bottle length of 35 cm.
EN
Using the refrigerator
13