Get Started; Before First Use; Treatment Steps - Silk’n FaceTite H2111 Manual Del Usuario

8. Get started!

8.1 Before first use

U
Take the device out of the packaging, and check that all
parts are included.
U
If any items are missing or appear to be damaged, contact
customer service.
U
Before first use, remove the protective film that covers the
electrodes.

8.2 Treatment steps

1. Remove the device and the other components from the
box.
2. Remove the protective film from the treatment surface
(#1).
3. Plug the cable of the adapter (#6) into the device socket
(#5). Then connect the adapter (#6) into the electricity
supply. All 5 energy level indicator lights (#3) will cycle
continuously. The device is now in standby mode.
4. Before you start, make sure that your skin is clean and dry,
and that you have removed all jewellery.
5. Press the control button (#4). The device starts at energy
level 1 automatically, and one energy level indicator
light (#3) will be on.
6. Apply a small amount of Silk'n Slider Gel to the treatment
surface (#1).
13
EN