Picture Image Adjustment; Adjust Picture Image Manually; Normal Function - Eiki LC-NB2 Manual De Instrucciones

PICTURE IMAGE ADJUSTMENT

Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
IMAGE and press the SELECT button. Another dialog box
PICTURE IMAGE ADJUSTMENT Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to change by
pressing the POINT UP/DOWN buttons. To change the value,
press either the POINT RIGHT button or the POINT LEFT
button.
Fine sync.
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 255.)
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
White balance (Red / Green / Blue)
Move the arrow to Red, Green, or Blue that you want to adjust.
Press POINT LEFT button to adjust the colour of image lighter, and
press POINT RIGHT button to adjust deeper. (From 0 to 63.)
Contrast
Press POINT LEFT button to adjust the image lighter, and press
POINT RIGHT button to adjust deeper. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust the image darker, and press
POINT RIGHT button to adjust brighter. (From 0 to 63.)
Each of the keys operates as follow.
Reset
Recalls the data previously adjusted.
Stored
Stores the adjusted data in the memory.
Quit
Closes the PICTURE IMAGE ADJUSTMENT Menu.
The normal picture level is preset on this projector at the factory and
can be restored anytime you press the NORMAL button (located on
the Top Control or on the Remote Control Units). The "Normal"
display will be displayed on the screen for a few seconds.

ADJUST PICTURE IMAGE MANUALLY

NORMAL FUNCTION

COMPUTER MODE
Close the PICTURE
IMAGE ADJUSTMENT
Menu.
Normal
It indicates the
level of the item.
Move the arrow to
the item and press
POINT RIGHT /
LEFT button.
GB
27