Picture Image Adjustment; Adjusting The Picture Image - Eiki LC-NB2 Manual De Instrucciones

PICTURE IMAGE ADJUSTMENT

Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
IMAGE and press the SELECT button. Another dialog box
PICTURE IMAGE ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the item that you want to adjust by
pressing the POINT UP/DOWN buttons. To change the value,
press either the POINT RIGHT button or the POINT LEFT
button.
Colour
Press POINT LEFT button to adjust the image lighter, and press
POINT RIGHT button to adjust deeper. (From 0 to 63.)
Tint
Press POINT LEFT button to adjust the colour more purple, and
press POINT RIGHT button to adjust more green. (From 0 to 63.)
White balance (Red / Green / Blue)
Move the arrow to Red, Green, or Blue that you want to adjust.
Press POINT LEFT button to adjust the colour of image lighter, and
press POINT RIGHT button to adjust deeper. (From 0 to 63.)
Contrast
Press POINT LEFT button to adjust the image lighter, and press
POINT RIGHT button to adjust deeper. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust the image darker, and press
POINT RIGHT button to adjust brighter. (From 0 to 63.)
Sharpness
Press POINT LEFT button to adjust the image softer, and press
POINT RIGHT button to adjust sharper. (From 0 to 63.)
Each of the keys operates as follow.
Reset
Recalls the data previously adjusted.
Stored
Stores the data in the memory.
Quit
Closes the PICTURE IMAGE ADJUSTMENT Menu.
The normal picture level is preset on this projector at the factory and
can be restored anytime you press the NORMAL button (located on
the Top Control or on the Remote Control Unit). The "Normal"
display will be displayed on the screen for a few seconds.

ADJUSTING THE PICTURE IMAGE

NORMAL FUNCTION
Close the PICTURE
IMAGE ADJUSTMENT
Menu.
Normal
It indicates the
level of the item.
Move the arrow to
the item and press
POINT RIGHT /
LEFT button.
GB
31