Downstream Absolute Filter Replacement; Motor Cooling Fan Inspection And Cleaning; Tightness Inspection; Disposing Of The Vacuum Cleaner - Nilfisk VHW200 Manual De Instrucciones

Downstream absolute filter replacement

WARNING!
Take care not to raise dust when this operation is
carried out. Wear a P3 mask and other protective
clothing plus protective gloves (DPI) suited to the
hazardous nature of the dust collected, refer to the
laws in force.
WARNING!
Do not use the absolute filter again after having
removed it from the vacuum cleaner.
Figure 11
1. Knob
2. Cover
3.
Absolute filter
WARNING!
Reassemble with care to avoid trapping your hands
between the vacuum unit and the container. Use
gloves that provide protection against mechanical
risks (EN 388) with a level of protection CAT. II.
Before proceeding with these operations, turn off the vacuum
cleaner and remove the cable plug/terminals from the power
socket.
■ Unscrew the knob (1), and remove the cover (2).
■ Remove the absolute filter (3) and place it in a plastic
bag, close the bag hermetically and dispose of the filter
in accordance to the laws in force.
■ Insert a new absolute filter (3) with the same filtering
characteristics as the removed one.
■ Reinstall the cover (2) by fastening it with the knob (1).

Motor cooling fan inspection and cleaning

Periodically clean the motor cooling fan to prevent the motor
from overheating, especially if the device is used in a dusty
place.

Tightness inspection

Figure 12
1. Blower connecting hose
2. Vacuum hose
Hoses check
Make sure that connecting hose (1) is in a good condition and
correctly fixed.
If the hose is damaged, broken or badly connected to the
unions, it must be replaced.
When sticky materials are treated, check for possible clogging
along the hose (2), in the inlet and on the baffle plate inside
the container.
04/2017
VHW200 - VHW201 - VHW210 - VHW211

Disposing of the vacuum cleaner

Dispose of the vacuum cleaner in compliance with the laws in
force.
■ Proper disposal (electric and electronic waste).
(Applicable in the European Union and in countries
providing a separate collection system)
The above symbol (Fig. 13), which is present on the product
or in its documentation, indicates that the product cannot be
disposed of together with other domestic waste at the end of
its life cycle.
To prevent damage to the environment or health caused by
improper waste disposal, please separate this product from
other waste and recycle it responsibly in order to support the
sustainable reutilisation of material resources.
This product can not be disposed of together with other
commercial waste.

Wiring diagrams

Basic model
1. Plug
2. Vacuum cleaner
3.
Circuit breaker
Item Part
Circuit breaker (if
equipped)
Q1
Circuit breaker box (if
equipped)
11
Figure 13
Figure 15
Code
VHW200 VHW201
VHW210 VHW211
Z8 39319 Z8 39319
Z8 39932 Z8 39932
GB
C411