4. Installation
Positioning Your Appliance
Choosing the Right Location
This appliance should be installed in a room that is dry
and well ventilated. To provide adequate ventilation, make
sure the refrigerator is at least 15 mm clear on all sides
from kitchen cabinetry (Fig.4-1). Any units placed above
the appliance must be clear by 15
ventilation.
must be left for opening the doors and removing the shelves
(Fig.4-2).
This appliance should be at least 100 mm from any electric or
gas cooker and 300 mm from any coal or oil stove. If this is not
possible, make sure that appropriate insulation is used.
Avoid exposing the appliance to direct sunlight, and sources
of heat (such as radiators, heaters or cookers).
If this appliance is situated in a cold environment (such as
consistent and this may damage foods. A consistent ambient
temperature of 10 °C or above is recommended.
t
590
400
All dimensions in mm
15
15mm
ArtNo.600-0034 - Clearances
15
15
(Doors omitted for clarity)
Fig.4-1
Fig.4-2
450
Fig.4-3
Toe
moulding