Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Graphical symbols for use on equipment and their
descriptions
Symbol
Explanation
Alternating current (A.C.)
Direct current (D.C.)
Protective earth
Protective bonding earth
Functional earth
For indoor use only
About this system
R This system is an auxiliary system; it is not
designed to provide complete protection
from property loss. Panasonic will not be
held responsible in the event that property
loss occurs while this system is in operation.
R The system's wireless features are subject
to interference, therefore functionality in all
situations cannot be guaranteed.
Panasonic will not be held responsible for
injury or damage to property that occurs in
the event of wireless communication error
or failure.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
For assistance, please visit http://shop.panasonic.com/support
HN7001_(en_en)_0209_ver.140.pdf 5
Important Information
Symbol
Explanation
Class P equipment
(equipment in which
protection against electric
shock relies on Double
Insulation or Reinforced
Insulation)
"ON" (power)
"OFF" (power)
Stand-by (power)
"ON"/"OFF" (power;
push-push)
Caution, risk of electric
shock
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R For the access point, use only the power
source marked on the product. For the
cameras, 5.0 V, 1.0 A or higher power
source.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet or micro-USB
connector into the power supply device's
micro-USB jack. Failure to do so may
cause electric shock and/or excessive heat
resulting in a fire.
5
2018/02/09 11:33:52
Publicidad
Capítulos
Tabla de contenido
