Power Requirements - Peavey RQ 4300 Series Manual De Instrucciones De Uso

Hum and Noise:
Output Residual Noise
Ref: 0 dBu
Master L/R -105 dBu
Mono
-90 dBu
Submaster -98 dBu
-88 dBu
(Hum and Noise Measurements: 22 Hz to 22 KHz BW)
Equivalent Input Noise (EIN):
-128 dBu (Input terminated with 150 Ohms)
Crosstalk:
>90 dB Adjacent Input Channels (20 Hz - 20 kHz)
>70 dB Left to Right Outputs (20 Hz - 20 kHz)
Common Mode Rejection Ratio (Mic Input):
50 dB min (20 Hz - 20 kHz)
70 dB typ @ 1 kHz
Meters:
L/R Master and all Submasters = 12 segment, peak reading
(0 dB= +4 dBu)
Signal / Overload Indicators:
Red LED lights 2 dB below clipping
Lamp Power:
12 VDC @ 350mA per connector, or 12VDC @ 700mA total maximum load

Power Requirements:

DOM: 100 VAC –240 VAC 50/60 Hz
Dimensions:
RQ 4324
™
Height: 8.9" (226 mm)
Width: 36.6" (930 mm)
Depth: 19.5" (495 mm)
Weight: 36 lbs. (16.4 kg)
S/N Ratio Test Conditions
109 dB All Faders Down
94 dB Master Fader Nominal,
Channel Faders Down,
All Channels Assigned
102 dB All Faders Down
92 dB Submaster Fader
Nominal, Channel
Faders Down,
All Channels Assigned
70 Watts Nominal, 24 chan
80 Watts Nominal, 32 chan
RQ
Height:
Width:
Depth:
Weight:
19
4332
™
8.9" (226 mm)
44.6" (1132 mm)
19.5" (495 mm)
48 lbs. (21.8 kg)