Publicidad
Idiomas disponibles
Idiomas disponibles
installation
Do not install the appliance:
outdoors,
in an environment
with dripping
water,
in rooms which are at risk of
frost.
The appliance
is very heavy
for
empty weight see the following
table:
Freezer 18"
Freezer 24"
Freezer 30"
255 tbs / 115 kg
300 Ibs / 135 kg
335 tbs / 150 kg
Installation
room
The appliance
should be installed in
a dry, welt ventilated
room.
The ambient temperature
shoutd not
drop below 55 °F (13 °C) or rise
above 110 °F (43 °C), otherwise
malfunctions
may occur.
The installation
location should not
be exposed to direct sunlight and
not placed near a heat source, such
as an oven, radiator, etc.
If installation
next to a heat source is
unavoidable,
use a suitable
insulating
plate or observe the
following
minimum
distances from
the heat source:
1.2" (3 cm) from an electric
cooker,
12" (30 cm) from an oil or
solid fuel cooker.
Installation
cavity
It is important
to observe the
specified
dimensions
of the
installation
cavity for a trouble-free
installation
of the appliance
and for
the subsequent
general view of the
furniture front.
In particular
ensure that the cavity is
square. Squareness
can be checked
by suitable means, e.g. spirit level,
diagonal measurements,
etc.
Fu rn itu re/fi xt ures
The new appliance
wilt be mounted
securely to adjacent and overhead
furniture/fixtures.
For this reason it is essential that all
attachable
furniture/fixtures
are
connected
securely to the base or
the walt by suitable means.
Base
To ensure that the appliance
is
installed securely and functions
properly, the base must be flat and
level.
The base must be made of hard,
rigid material.
The installation
area must be the
same height as the rest of the room.
On account
of the heavy weight of a
fully loaded appliance,
a toad bearing base is required.
For the fully loaded weight see the
following
table:
Freezer 18"
Freezer 24"
Freezer 30"
560 tbs / 250 kg
780 tbs / 350 kg
950 tbs / 425 kg
If in doubt, contact
an architect
or
a building expert.
Installing
and
connecting
the
appliance
Have the appliance
installed by an
electrician
according
to the
enclosed
installation
instructions.
After installing the appliance,
wait at
least a half an hour before switching
on the appliance.
During transit the
oil in the refrigeration
system may
have moved.
Before switching
on the appliance
for the first time, clean the inside of
the appliance.
7
Publicidad
Capítulos
