Publicidad
Idiomas disponibles
Idiomas disponibles
C3 Pressthe
SETUP button.
Setting the
temperature
The temperature
can be set from
7°Fto
9°F(-14°Cto
23°C).
We recommend
a setting of 0 °F
(-18 °C).
The temperature
can be changed
with the + buttons
(warmer) or-
(colder). The temperature
can be
adjusted
in 1 °F (0.5 °C) steps.
To adjust the required temperature:
C3 Activate the setup mode with
the4
or
_,buttons.
The FREEZER
symbol is
displayed.
C3 Set the required temperature
with the + (warmer) or-
(colder)
buttons.
[_
Depending
on the model, the
appliance
can also be switched
off via the temperature
setting.
When the highest temperature
has been reached, OFF is
displayed.
Super function
The Super function
is used to freeze
large quantities
of fresh food and
should be switched
on some hours
before the fresh food is placed in the
freezer. In general, 4 6 hours is
adequate.
If the max. freezing
capacity
is used, 24 hours are
required.
When the Super function
is
activated,
the appliance
is cooled as
cold as possible to a preset
temperature
set at the factory.
The function
is activated by pressing
the SUPER button.
The SUPER
_ symbol and the
Super temperature
are displayed.
The function
is ended:
by pressing the SUPER button
again,
by activating
the Eco function,
by activating
the Vacation
mode,
by activating
the Sabbath
mode.
After approx. 21/2 days the
freezer automatically
switches
back to the temperature
set
before Super function.
Setup mode
There are several menus for
adjusting the appliance
functions
to
individual
requirements.
These
adjustments
can be made in SETUP
mode.
To activate setup mode:
The first menu (temperature
unit)
is displayed.
To switch to the next menu:
C3 Press the 4
or _
button.
The next menu and the current
setting (usually On/Off) are
displayed.
To select between the different
setting options
within one menu:
C3 Press the+or
button.
[_A
modified setting is saved
when the next menu is selected
with the 4
or _
button.
To end setup mode:
C3 Pressthe
SETUP button.
All modified settings are saved.
If no button is pressed within
12 seconds,
setup mode ends
automatically.
All modified
settings are saved. The required
temperature
is displayed again.
11
Publicidad
Capítulos
