Technical Details; Safety Instructions; Cleaning And Maintenance - Royal Catering RCPR-16E Manual De Uso

1. INTRODUCTION
The popcorn machine by Royal Catering combines all advantages of machines from
other manufacturers. It is made of aluminum casting and equipped with hardened
glass, which is protected against sprinkles and splashes due to an additional internal
coating. This machine offers high quality, good processing and compliance with all
safety standards. Thanks to its energy-saving operation, this device is very suitable for
restaurants, snack bars, cinemas and many more.

2. TECHNICAL DETAILS

Model RCPS-16E | RCPR-16E | RCPW-16E
Power (V) 230
Performance (kW) 1.6
Frequency (Hz) 50
Temperature (°C) 220~270
Amount of oil (ml/once) 50
Amount of sugar (g/once) 50
Amount of grain (g/once) 150
Efficiency 1/2

3. SAFETY INSTRUCTIONS

1. The popcorn machine may be placed where it has a strong and rigid position (a
3% slant is an advantage).
2. The device should only be connected with an appropriate power source.
3. The security switch / power switch should be located near the machine. The
path must be freely accessible.
4. All electrical connections have to be carried out by authorized personnel only
8
4. OPERATION
1. In order to switch on the heating range and the light turn on the switch (War-
ming & light).
2. Turn on the switch (HEAT) and pre-heat the bowl for 5-6 minutes. Put 50 ml oil
(coconut oil would be best), 150 g grain and 50 g sugar into the pan.
3. Please note that during the production of popcorn, the door needs to be closed
so that the hot popcorn cannot escape and cause burns.
4. By turning on the stir function (TURN-switch) you can stir the popcorn until
all grains are popped. Now, tip the popcorn out of the bowl. To do that you have
to operate the lever attached to the bowl.
5. You can repeat this procedure as often as you want to. It only takes approxi-
mately 2 minutes until the grain steadily pops.
6. Do not let any oil drop on the hot plate as it can result in a fire. WARNING: Do
not let any water drip on the plate during the popcorn procedure.
7. The device is equipped with a thermostat. If the temperature exceeds the maxi-
mum the machine switches off automatically to ensure the required safety.

5. CLEANING AND MAINTENANCE

1. Switch off the device and disconnect the power plug in order to prevent acci-
dents when cleaning the machine.
2. To clean the device from the outside, use a wet cloth with some corrosion pro-
tection. DO NOT clean the machine with water as it can damage the electric
function of the device.
3. If the device is not used for a prolonged period of time unplug the power plug.
4. DO NOT clean the inside of the device with hard metallic objects, as this will
damage the coating of the machine.
9