Maintenance And Care - Bodum BISTRO 11001 Instrucciones De Uso

– For simple cleaning unscrew the dosage lid (9) from the thermos jug (8). Rinse
the thermos jug (8) thoroughly with warm water after use.
Warning: The thermos jug (8) is not suitable for washing in the dishwasher. Do
not immerse the thermos jug in water.
– The lid cap (10) can be removed trough pull from the dosage lid (9) for ease
of cleaning. Both the dosage lid and lid cap are dishwasher safe.

MAIntenAnce AnD cAre

DE-SCALING THE POUR OvER COFFEE MACHINE
– To guarantee that the pour over coffee machine works correctly, you have
to ensure that the machine is kept free of lime-scale. The optimum cycle is
dependent on the hardness of the water which is different from country to
country. We would advise de-scaling the machine after every 100 uses.
Important: If you do not de-scale the pour over coffee machine then this can
lead to damage!
– If over scaling switches the appliance off automatically the ON/OFF switch
(15) will illuminate red. You then must de-scale the pour over coffee machine
immediately because the machine will no longer operate.
– Regular de-scaling can increase the service life of the product and guarantees
its faultless functionality. Furthermore, regular de-scaling will result in less
steam forming, faster brewing times and energy savings.
– Deposits should be removed with a commercially available de-scaling solu-
tion for coffee machines or with a solution of vinegar and water (20% vine-
gar and 80% water). When using commercially available de-scaling solutions
ensure that these are suitable for use with heating elements made of copper
as well as silicone materials. (Carefully check the specifications and dosage
instructions of the manufacturer).
– Fill the water tank (2) with de-scaling solution or a vinegar and water solu-
tion (do not fill above the MAX line) and place the coffee shower (11), filter
holder (6), coffee filter (7) (without ground coffee) and the thermos jug (8)
with the dosage lid (9/10) into their intended positions in the appliance.
– Then rinse the separate parts thoroughly with cold water and rinse the appli-
ance by running through with cold, clear water at least twice. Prior to doing
so ensure that all of the separate parts have been correctly reassembled in
the pour over coffee machine.
– Any other servicing should be performed by an authorized service facility.
7