Oven Use; Electronic Oven Controls - Sears Kenmore 664.7511 Serie Manual De Uso Y Cuidado

Estufa a gas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The normal operation of the range will include several noises
that may be heard each time the bake or broil burners ignite
during the cooking cycle:
Gas valves may make a "popping" sound when opening
or closing.
Igniters will "click" several times until a flame is sensed.
A "poof" sound is heard when a bake or broil burner
ignites.
Odors and smoke are normal when the oven is used the first
few times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and
well-ventilated room.

Electronic Oven Controls

Control Display
The display will flash when powered up or after a power loss.
Press CANCEL to clear. When oven is not in use, the time of
day is displayed.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
To change: Press and hold the Temp/Time "up" arrow keypad
for 5 seconds. "°C" or "°F" will appear on the display. Repeat
to change back.
To exit mode, press CANCEL.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
To change: Press and hold LIGHT for 5 seconds. Repeat to
change back.
To exit mode, press CANCEL.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
To Set Demo Mode: Press CANCEL twice, then the Temp/Time
"up" arrow keypad and TIMER SET/OFF. Repeat to change
back and end Demo mode.

OVEN USE

Tones
Tones are audible signals, indicating the following:
Basic Functions
One Tone
Valid keypad press
Oven is preheated (long tone).
Function has been entered.
Reminder, repeating every 20 seconds after the four
end-of-cycle tones
Three Tones
Invalid keypad press
Four Tones
End of cycle
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to
provide consistent temperature but may run slightly hot or cool
at any point in time due to this cycling. Most thermometers are
slow to react to temperature change and will not provide an
accurate reading due to this cycling.
The oven provides accurate temperatures; however, it
may cook faster or slower than your previous oven, so the
temperature can be adjusted to personalize it for your cooking
needs. It can be changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press and hold the Temp/Time "down" arrow keypad for
5 seconds until the oven display shows the current setting,
for example "0°F CAL" or "00."
2. Press the Temp/Time "up" or "down" arrow keypad to
increase or to decrease the temperature in 5°F (3°C)
amounts. The adjustment can be set between 30°F (18°C)
and -30°F (-18°C).
3. Press START.
Example: After a 5°F (3°C) adjustment increase, the oven will
cook at 305°F (152°C) while the display shows 300°F (149°C).
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Kenmore 7511302275113000p

Tabla de contenido