Oven Use; Electronic Oven Controls - Sears Kenmore Elite 664.9522 Serie Manual De Uso Y Cuidado

Odors and smoke are normal when the oven is used the first
few times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and
well-ventilated room.
Control Display
The display will flash when powered up or after a power loss.
Press STOP to clear. When the oven is not in use, the time of
day is displayed. If the range is in Energy Save mode, the
display will be blank when not in use.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press
■
Oven is preheated (long tone).
■
Function has been entered.
■
Reminder, repeating each minute after the four
■
end-of-cycle tones
Three Tones
Invalid keypad press
■
Four Tones
End of cycle
■
Use Settings/Clock to change the tone settings.
Energy Save
The Energy Save mode puts the range into sleep mode and
reduces energy consumption.
1. Press SETTINGS/CLOCK until "ENERGY SAVE" is displayed.
2. The current setting will be displayed.
1
3. Press to adjust the setting.
4. Press START or STOP to exit and display the time of day.
14

OVEN USE

NOTE: The convection fan will shut off when the oven door
is opened. If the oven door remains open for too long, the
heating elements will shut off until the oven door is closed.
All timers, including any active Cook Time or Timed Cook
functions, will continue to count down.

Electronic Oven Controls

Settings
Many features of the oven control can be adjusted to
meet your personal needs. These changes are made using
Settings/Clock.
Use Settings/Clock to scroll through the features that can
be changed. Each press of Settings/Clock will advance the
display to the next setting. After selecting the feature to be
changed, the control will prompt you for the required input.
Then press START or STOP to exit and display the time of
day. Details of all of the feature changes are explained in
the following sections.
Press STOP to exit Settings.
Clock
The Clock can use a 12- or 24-hour cycle.
1. Press SETTINGS/CLOCK until "CLOCK" is displayed.
2. Use the number keypads to set the time of day.
3. Press START to change the time.
4. Press
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed
to Celsius.
1. Press SETTINGS/CLOCK until "TEMP UNIT" is displayed.
2. The current setting will be displayed.
3. Press
4. Press START or STOP to exit and display the time of day.
Audible Tones Disable
Turns off all tones, including the end-of-cycle tone and
keypress tones. Reminder tones are still active when all
tones are disabled.
1. Press SETTINGS/CLOCK until "SOUND" is displayed.
2. The current setting will be displayed.
3. Press
4. Press START or STOP to exit and display the time of day.
3 6
for AM or for PM.
1
to adjust the setting.
1
to adjust the setting.