Disposal Information; Before Using For The First Time - Bosch BSG6 Instrucciones De Uso

de en

Disposal information

Packaging
The packaging is designed to protect the
vacuum cleaner from being damaged during
transportation.
It is made of environment-friendly materials
and can be recycled.
Dispose of packaging that is no longer
required at an appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many
recyclable materials.
Therefore, please take used vacuum cleaners
to your retailer or recycling centre so that
they can be recycled.
For current disposal methods, please enquire at
your appliance dealership or local council.
!
Please note
Only connect the appliance to a socket that is
protected by at least a 16 amp fuse.
If a fuse should blow when you switch on the
vacuum cleaner, this may be because other
electrical appliances which have a high
current draw are connected to the same
power circuit.
To prevent the fuse from tripping, select the
lowest power setting before switching the
vacuum cleaner on, and increase the power
only once it is running.
Fold out picture pages.

Before using for the first time

1*
Figure
Push the handle onto the flexible tube and
until it engages.
2*
Figure
Push the crevice nozzle and upholstery nozzle
back into the accessories holder as indicated.
Setting up
3
Figure
a) Push the flexible hose adapter into the air
intake opening on the vacuum cleaner lid until
it engages.
b) To remove the flexible hose, press the two
lugs together and pull the tube out.
4*
Figure
Push the handle into the suction
pipe/telescopic tube.
To remove it, turn the handle slightly and pull
it off the tube.
5*
Figure
Insert the suction pipe/telescopic tube into
the adapter of the floor tool.
To remove it, turn the tube slightly and pull it
out of the floor tool.
6*
Figure
a) Connect the suction pipes together, or
b) Unlock the telescopic tube to adjust its length
by moving the sliding switch in the direction
of the arrow.
7
Figure
Holding the power cord by the plug, pull out
the required length and plug it into the mains
socket.
8
Figure
Press the on/off button in the direction of the
arrow to switch your vacuum cleaner on/off.
9
Figure
Adjust the suction by turning the on/off
button in the direction of the arrow.
* Depending on equipment
9