Installing The Suction Pipe - Kemper 1502198 Instrucciones De Montaje

Installing the Suction Pipe

Art. Nr.: 1502198
Hinged Cantilever
Fig. 2-6
● Insert the bend (24) into the suction tube (22).
● Place the suction tube (22) with bend (24) on the mounting
bracket (23), the bend (24) must be inserted into the socket
of the arm mount (25).
● Fasten the bend (24) with the supplied sheet metal screws.
● Secure the suction pipe by means of Velcro fasteners (26).
Wrap the Velcro fasteners (26) around the suction pipe (22).
Then thread the Velcro fasteners (26) through the holes of the
brackets (23) and tighten them.
● Attach the ends of the suction tube (27) with two tube clamps
(28) on the socket of the wall bracket (29) and the suction pipe
(22).
Note
For example, a wire feed unit can be mounted for carrying
in the hitch under the hinged cantilever.
● Note that the first cantilever has a maximum weight of 50 kg
which cannot be exceeded.
2-6