Information For The Operators - Kemper Clean Air Tower Instrucciones De Uso

KEMPER CleanAirTower Instruction manual - EN

1.3 Information for the operators

This Instruction Manual is an essential part of the filtration device.
The operator shall ensure that the operating personnel is made familiar with it.
The operator is obliged to complement the Instruction Manual with operating
instructions resulting from the national accident prevention and environmental
protection regulations, including information on supervisory and reporting obligations
to take account operational features, e.g. regarding organization of work, work
processes and deployed personnel. In addition to the Instruction Manual and the
binding accident prevention regulations applicable in your country and in the place
where the device is used it is necessary to take into account the recognized technical
rules for safe and proper handling the device.
The operator shall not, without the consent of KEMPER GmbH carry out any
changes, additions and alterations on the filtration device that could affect its safety!
This applies above all to installation and adjustment of safety devices, relief valves
and welding of bearing structural components. The spare parts used must comply
with the technical requirements specified by KEMPER GmbH company. This is
always assured when using original spare parts.
Operation, maintenance, repairs and transport of the filtration device may only be
performed by trained and knowledgeable staff. Competence of the personnel
regarding operation, maintenance and repairs must be clearly defined.
Serial No.: 1502206 - 51 - Rev.: 1
Status as of: 05/2014
Technical modifications without previous notification and errors reserved.