Hinged Cantilever Assembly On A Wall; Wall Console - Kemper 1502198 Instrucciones De Montaje

2.2

Hinged Cantilever Assembly on a Wall

Wall Console

Art. Nr.: 1502198
Hinged Cantilever
Fig. 2-2
● Attach the wall console (1) for the hinged cantilever and the
wall console with exhaust port (2) with appropriate screws and
plugs on a load-bearing surface.
Note
Observe the recommended mounting material in Chapter 1.4 of
this manual.
● Use the provided mounting holes of the wall consoles (3), (4),
(5) and (6).
● Align the wall console with a spirit level.
● If necessary, position the bearing plates between the wall console
and the surface to compensate any unevenness of the wall surface.
2-2