Changing The Suction Filter - Kemper MaxiFil Instrucciones De Servicio

Ocultar thumbs Ver también para MaxiFil:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 149
7. Reinsert the mains plug back into the socket and switch the device on. The green
lamp on the device switch should light up indicating that the device is running
normally.

7.4 Changing the suction filter

1. Ensure a plastic bag/bin bag is available.
2. Switch the product off at the device switch.
3. Prevent unintentional restarting by unplugging the device.
4. Pull the suction filter (Pos. 15) forwards out of the suction filter holder (Pos. 16)
and dispose of it in the bin bag.
5. Please ensure that as little dust as possible is stirred up while doing so.
6. Replace the filter insert with a new one.
1502762-00
Fig. 14: Changing filters
Fig. 15: Changing the suction filter
- 64 -
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido