Basic Operations; Turning On The Power - JVC KD-S6060 Manual De Instrucciones

1 3

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
FM
CD
AM
To operate the tuner (FM or AM),
see pages 7 – 10.
To play a CD,
see pages 11 – 13.
3
Adjust the volume.
To increase the volume
To decrease the volume
Volume level indicator (see page 17)

BASIC OPERATIONS

LOUD
SEL
DISP
7 8 MO 9
Volume level appears.
10 11 RPT 12 RND
MODE SCM
4
Adjust the sound as you want.
(See pages 14 – 16.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
second.
"SEE YOU" appears, then the unit turns off.
• If you turn off the power while listening to a
CD, CD play will start from where playback has
been stopped previously, next time you turn on
the power.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a CD
and adjust it as required during playback.
FM
CD
SSM
AM
2
for more than one
5