Sound Adjustments; Adjusting The Sound; Turning On/Off The Loudness Function - JVC KD-S6060 Manual De Instrucciones

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
SEL
BAS
(bass)
VOL
(volume)
Indication To do:
BAS Adjust the bass.
TRE Adjust the treble.
FAD* Adjust the front
and rear speaker
balance.
BAL Adjust the left
and right speaker
balance.
VOL Adjust the volume. 00 (min.)
* If you are using a two-speaker system, set the fader
level to "00."
14
Each time you press the
button, the adjustable items
change as follows:
TRE FAD
(fader)
(treble)
BAL
(balance)
Range
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
|
50 (max.)
2
Adjust the level.
To increase the level
To decrease the level
Ex.: When you adjust "TRE" (treble)
Note:
Normally, the + and – buttons work as the volume
control buttons. So you do not have to select "VOL"
to adjust the volume level.
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these
frequencies to produce a well-balanced sound at
low volume levels.
Each time you press LOUD,
LOUD
the loudness function turns on
and off alternately.
LOUD (loudness) indicator