Using The Sound Control Memory (Scm) - JVC KD-S6060 Manual De Instrucciones

Using the sound control
memory (SCM)
You can select and store a preset sound
adjustment suitable for each playback source
(Advanced SCM).
Selecting and storing the sound
modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the
display.
A sound mode can be stored for each of the
following sources—FM1, FM2, FM3, AM, and
CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the
sources, see "Canceling Advanced SCM—
SCM LINK" on page 17.
Select the sound mode you want.
SCM
Each time you press the
button, the sound mode
changes as follows:
SCM OFF BEAT
SCM
Ex.: When you select "BEAT"
• When "SCM LINK" is set to "LINK ON," the
selected sound mode can be stored in memory
for the current source and the effect applies
only to the current source.
• When "SCM LINK" is set to "LINK OFF," the
selected sound mode effect applies to any
source.
Indication
SCM OFF (Flat sound)
BEAT
SOFT
POP
Recalling the sound modes
When "SCM LINK" is set to "LINK ON,"
select the source.
The sound mode stored in memory for the
selected source is recalled.
Notes:
SOFT POP
• You can adjust each sound mode to your preference,
• To adjust the bass and treble reinforcement levels or
For:
Rock or
disco music
Quiet
background
music
Light music
Each time you change the
FM
playback source, the SCM
indicator flashes on the
CD
display.
AM
SCM
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
on page 16.
to turn on/off the loudness function temporarily, see
page 14. (Your adjustments will be canceled if
another source is selected.)
Preset values
BAS TRE LOUD
00 00 ON
+02 00 ON
+01 –03 OFF
+04 +01 OFF
15