Introduction; Precautions - JVC NX-PN10 Manual De Instrucciones

Sistema de componentes compactos
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.

Precautions

Installation
• Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C.
• Install the unit in a location with adequate ventilation to prevent internal heat buildup inside the
unit.
DO NOT install the unit in a location near heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
• Leave sufficient distance between the unit and the TV.
• Keep the unit away from the TV to avoid interference with TV.
Power Sources
• When unplugging the unit from the wall outlet, always pull on the plug, not the AC power cord.
DO NOT handle the AC power cord with wet hands.
Internal Heat
For safety, observe the following carefully:
• Make sure there is good ventilation around the unit. Poor ventilation could overheat
and damage the unit.
• DO NOT block the ventilation openings or holes. If they are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.
Others
• Should any metallic object or liquid fall into the unit, unplug the AC power cord and consult your
dealer before operating any further.
DO NOT disassemble the unit since there are no user serviceable parts inside.
• If you are not going to operate the unit for an extended period of time, unplug the AC power cord
from the wall outlet.
If anything goes wrong, unplug the AC power cord and consult your dealer.
2

Introduction

Publicidad

Tabla de contenido
loading

Tabla de contenido