Playing Back From Other Equipment; Connecting Other Equipment; Operations - JVC NX-PN10 Manual De Instrucciones

Playing Back from Other Equipment

Connecting Other Equipment

By using a stereo mini plug cord (not supplied), you can connect other equipment with analog audio
output jacks, such as a portable audio player, etc.
To headphones or
audio out
Stereo mini plug cord
Portable
(not supplied)
audio player
• Refer to the instruction manual supplied with the equipment.
NOTE:
Make sure the unit is on standby when connecting or disconnecting other equipment.

Operations

To Listen to Other Equipment
Select AUDIO IN as the source.
1
2
Start playing the equipment.
To Adjust the Sound Input Level from the Equipment
You can adjust the sound input level from the connected equipment if the incoming signal is too
weak or too strong.
Select AUDIO IN as the source.
1
Hold down to adjust the sound input level.
2
LEVEL 1: Ordinary input level.
LEVEL 2: Increases the input level.
LEVEL 3: Increases the input level more than "LEVEL 2."
FM
AUDIO IN
LEVEL 1
LEVEL 3
Rear side
LEVEL 2
19