Storing And Caring For The Product - Imetec P1901 Instrucciones De Uso

• Clean the secondary dust collection compartment filter (11a) using the small brush
(21i)
• Fit the dust container back on (11c) by turning it clockwise [Fig. Q] until the closed
compartment position at the indicator triangle.
EN
Cleaning the electrical contacts
• detach the portable vacuum cleaner (4) from the handle (3)
• Press the handle release button (18) to remove the handle (3)
• use the portable vacuum cleaner (4) to vacuum any dust residues from the connectors
(19) [Fig. r]
WARNING! Let the filters dry completely after washing
them for at least 24 hours before reassembly.
WARNING! Make sure all cleaned parts are completely dry
before reusing the appliance.

STORING AND CARING FOR THE PRODUCT

When not in use, the upholstery nozzle (21a), the crevice nozzle (21d) and the ceiling nozzle
(21e), may be stored on the charging base/accessory holder (9) [Fig. S].
If the appliance is not used, take the feeder out (7) and store the appliance in a dry and dust-
free place.
PROBLEM
The appliance does not go
on.
The appliance turns off
during use and does not
turn on again.
The vacuum cleaner does
not suction well.
The battery status lEd
(5) switches on during
recharge.
22
TROUBLESHOOTING
• Ensure the batteries are charged.
• Ensure the portable vacuum cleaner (4) is correctly inserted in the
portable vacuum cleaner support (6)
• Ensure you have pressed the vacuum cleaner switch-on/ power
selection button (16).
• The batteries are flat. Charge the batteries.
• If the problem persists the battery pack (4e) must be replaced.
Contact a technical assistance centre.
• The dust collection system is full: empty the main dust collection
system (12) and the secondary dust collection system (11)
• The fabric filter (12a) is clogged: clean or replace the filter.
• Clean the brush (10a)
• Correctly insert the battery pack (4e) in the portable vacuum cleaner
(4)
• Ensure the portable vacuum cleaner (4) is correctly inserted in the
portable vacuum cleaner support (6)
SOLUTION