Storing And Caring For The Product; Troubleshooting - Imetec Duetta++ 8078 Manual Del Usuario

Escoba eléctrica con miniaspiradora manual

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

cleaninG the comBination Brush (7)

With the motor ON, rub the lower part of the brush with your hand to remove the dust and

fluff, which will be drawn.

cleaninG the Dust collection system (8)

caution! empty the dust container and clean the

filters after every use in order not to damage the

appliance.

Clean the dust collection system following the instructions below and paying attention to the

figures in the illustrative guide.

•

detach the mini-vacuum (8) from the body of the stick by pressing the release buttons

(5) [Fig. d1].

•

Press the release button (8a) [Fig. E1] and take down the dust container (8B+8C+8d)

[Fig. E2].

•

Take out filtering system 8C and 8d [Fig. E3] and empty out the contents of the dust

container (8B).

•

Separate the filter protection mesh (8C) from the cyclone filter (8d), and clean them

by carefully shaking and brushing away the dust. To do so, use a soft brush to prevent

any damage.

•

Take out the motor filter (8E) and clean it.

•

If necessary, rinse the parts of the dust collection system under running water. Before

putting them back in place, make sure they are completely dry.

warninG! let the filters dry completely after washing

them for at least 24 hours before reassembly.

nOTE:

•

replace the filter in the event it is damaged or impossible to clean.

•

replace the filter at least once a year.

•

Failure to clean or replace the filter will make the manufacturer's warranty

null and void.

Put the filtering system back inside (8C+8d) the dust compartment (8B) and attach it back

on the mini-vacuum (8), being careful to hook it onto the bottom fitting and making the

release button click (8a).