Connecting Audio Equipment - Sony HT-CT260H Manual De Instrucciones

C:\Users\ALAYA-Win7\Desktop\Eric's Data\HT-
CT260H\07_FromDTP\02_UC\02_US\US\030GET.fm
010COV.book Page 15 Wednesday, April 10, 2013 7:42 PM
 When connected via the OPTICAL IN jack, select "OPTICAL."
 When connected via the ANALOG IN jack, select "ANALOG."
Tip
 Even if the system is turned off (active standby mode), the HDMI signal will be sent
from the connected equipment to the TV via the HDMI connection. You can enjoy
image and sound from the equipment on the TV.
Connecting equipment with an HDMI jack

Connecting audio equipment

Note

When you connect a portable music player, etc. via its headphone jack to the ANALOG
IN jack of the system, adjust the volume on the portable music player to eliminate the
volume difference when you switch between the portable music player and other
input sources.
HDMI cable
(not supplied)
"PlayStation
DVD player, satellite tuner, cable
television tuner, etc.
Audio cable (not supplied)
masterpage:
HDMI OUT
3," Blu-ray Disc™ player,
®
Audio
signal OUT
Smartphone, "Walkman," or
other audio equipment
HT-CT260H
4-463-522-11(1)
Right
15
US