Connecting The Recorder To Other Equipment - Sony DAR-RD100 Manual De Instrucciones

Connecting the Recorder to Other Equipment

Connect other equipment (VCR, satellite tuner, PAY-TV decoder, etc.) to the LINE IN jacks of the
recorder.
Disconnect the recorder's mains lead from the mains when connecting them.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack) (page 71).
See also the operating instructions supplied with the connected equipment.
To record on this recorder, see "Recording From Connected Equipment" (page 49). To listen to the sound
of other equipment through the speaker system, see "Enjoying TV or VCR Sound From the Speaker
System" (page 90).
Connecting a VCR or similar device
To connect to the LINE 3 jack
Connect a VCR or similar recording device to the LINE 3/DECODER jack of this recorder.
to SCART input
Notes
• Pictures containing copy protection signals, which a prohibit copying, cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
DVD recorder
Be sure to connect your VCR to the DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV ("Line input 2" below).
VCR
• When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD
button on the remote.
• If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected VCR.
24
GB
TV
SCART cord
(not supplied)
to i
LINE1-TV
AERIAL
IN
LINE 1
OUT
VCR
Line input 1
DVD recorder
to i LINE
3/DECODER
LINE 3 / DECODER DIGITAL OUT COMPONENT
LINE 2 OUT LINE 4 IN
VIDEO OUT
COAXIAL
PCM/DTS/
MPEG/
L L
DOLBY DIGITAL
P B /C B
AUDIO AUDIO
VIDEO OUT
LINE 2 OUT
DIGITAL OUT
SELECT
- TV
RGB
R R
P R /C R
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL
COMPO-
Y
NENT VIDEO VIDEO
S VIDEO
TV
TV
Line input 2
VCR
DVD recorder