Linking The System (Link) - Sony HT-CT260H Manual De Instrucciones

C:\Users\ALAYA-Win7\Desktop\Eric's Data\HT-
CT260H\07_FromDTP\02_UC\02_US\US\070ADV.fm
010COV.book Page 28 Wednesday, April 10, 2013 7:42 PM
Linking the system
(LINK)
You can link the Sound Bar and the
subwoofer again to enable wireless
transmission between them.
1
Press LINK on the rear of the
subwoofer with the point of a
pen, etc.
The subwoofer keeps beeping for
a certain time. Perform steps 2 to 5
before the subwoofer stops
beeping.
2
Press AMP MENU.
3
Select "WS" with   (select),
then press
4
Select "LINK," then press
28
US
AMP
MENU
.
.
5
"START" appears, then press
"SEARCH" appears, and the Sound
Bar searches for equipment that
can be used with Link. Proceed to
the next step within 1 minute.
To quit the Link function during a
search for equipment, press .
When subwoofer is linked with the
Sound Bar, the  indicator on
the subwoofer lights up in green
and the subwoofer beeps once.
"OK" appears on the front panel
display.
If "FAILED" appears or the
subwoofer does not stop beeping,
perform the process again from
step 1.
6
Press AMP MENU.
The AMP menu turns off.
4-463-522-11(1)
masterpage: Left
.
HT-CT260H