Charging The Power Bank - Linde Safety Guard Manual Del Usuario

Idiomas disponibles

Pre-shift checks

 Circle the truck while remaining within this

warning area.

All the LEDs for the warning zone flash on the

mobile warning unit. A signal tone must sound

and the device must vibrate.

The mobile warning unit is now ready to use.

Alternatively, the pre-shift checks can be per-

formed in conjunction with a Safety Guard

static warning unit. The Safety Guard static

warning unit must be specially configured for

this purpose. Contact your service partner.

Charging the power bank

 Connect the charging station (6) to the pow-

er supply with the charging cable (1).

 Place the power banks (2) in the charging

 Use the USB cable (3) to connect the power

bank to the charging station.

 Switch on the charging station.

The LEDs (4) on the power banks flash.

Operating Instructions - 3008011701 EN - 11/2019