Intended Use; Limitations For Commissioning Or For The Permission To Operate - Linde Safety Guard Manual Del Usuario

Intended use

The components of the Linde Safety Guard
must only be used for their intended purpose.
The safety information must be observed.
Restricted approval for use
Linde Safety Guard is approved for use in
countries within the European Economic Area
and in Turkey. Use in other countries is not
authorised by Linde Material Handling.
The current EU declarations of conformity can
be found at:
https://www.linde-mh.com/en/About-us/
Media/
General
The Linde Safety Guard is a wireless assis-
tance system for protecting people and ob-
jects in defined danger areas in industrial envi-
ronments.
The components of the system can be used
inside and outside and as mobile or fixed com-
ponents.
If radio frequency interference at the place of
use results in adjustments to suit local condi-
tions, re-registration and approval may be
necessary.
Usage
The components of the Linde Safety Guard
are used in the working environment of indus-
trial trucks.
The system wirelessly measures the distance
between the component mounted on the in-
dustrial truck, components at fixed positions in
the working area and the mobile components
that individuals carry on their person.

Limitations for commissioning or for the permission to operate

BE BG CZ
Operating Instructions - 3008011701 EN - 11/2019
DK DE EE
The assistance system must not be used as a
guide when visibility is poor.
Installation
Components fitted in buildings can be used on
roll-up doors and in other danger areas where
it is difficult to see, such as junctions. These
components warn people about industrial
trucks that are approaching or automatically
brake industrial trucks.
The components on the industrial truck are
permanently connected to the on-board elec-
tronics. Only competent persons with electrical
knowledge and the relevant experience are
permitted to install components at fixed points
in the working area and to carry out servicing
work and repairs.
The work can be carried out by the service
partner.
Environment
The assistance system must be adapted by
the service partner at the place of use. Incor-
rect installation or other wireless networks can
cause malfunctions.
Only the service partner is permitted to make
adjustments to suit local conditions in the
event of radio frequency interference. In this
situation, it may be necessary to register and
obtain approval again.
 Carry out a functional test.
Active warning vest
This product may be used only as a compo-
nent of the Linde Safety Guard wireless assis-
tance system. It may be used only in countries
for which the assistance system is approved.
IE EL
1
Introduction
Intended use
ES FR
3