Ce - Manufacturer's Declaration Of Conformity; Technical Specifications - Viking GE 150 Manual De Instrucciones

– Incorrect electrical connection (voltage)
– Product modifications not approved by
VIKING
– Use of tools or accessories which are
not approved or suitable for the
machine, or are of inferior quality
– Improper use of the product
– Use of the product for sporting or
competitive events
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots, cooling ribs, fan
wheel)
– Corrosive and other resultant damage
caused by incorrect storage
– Damage to the machine through the
use of inferior-quality spare parts.
46
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
17. CE - manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
Shredding machine for plant trimmings
with electric motor (GE)
Manufacturer's VIKING
brand:
Type: GE 150.1
GE 250.1
GE 250.1 S
GE 260.1
GE 260.1 S
Serial number 6008
conforms to the following EU guidelines:
2000/14/EC, 2011/65/EC, 2002/96/EC,
2004/108/EC, 2006/95/EC, 2006/42/EC
The product has been developed in
conformance with the following standards:
prEN 50434, EN 60335-1
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Johann Weiglhofer
VIKING GmbH
The year of manufacture and serial
number appear on the identification plate
of the machine.
Measured sound power level:
GE 150.1 96.9 dB(A)
GE 250.1 100.8 dB(A)
GE 250.1 S 96.5 dB(A)
GE 260.1 98.4 dB(A)
GE 260.1 S 97.7 dB(A)
Guaranteed sound power level:
GE 150.1 99 dB(A)
GE 250.1 103 dB(A)
GE 250.1 S 100 dB(A)
GE 260.1 102 dB(A)
GE 260.1 S 101 dB(A)
Langkampfen,
2015-01-02 (YYYY-MM-DD)
VIKING GmbH
Research and Product Development
Manager

18. Technical specifications

GE 150.1/GE 250.1/GE 250.1 S:
Motor BSRBF 0.75/2-C
0478 201 9906 D - EN