QSC PLD Serie Manual De Instrucciones página 21

HOME > OUTPUTS > SPKR PROC > CROSSOVER > GAIN/POL > GAIN > ENTER
Step 2 — Set the Crossover Gain and Polarity
F1: A B C D
Gn/Pol
Parametric EQ
HOME > OUTPUTS > SPKR PROC > PEQ > BAND 1, 2, 3, 4, OR 5 > BAND BYPASS > ENTER
The graph is a composite of all five bands. Each band has a full range of 20 Hz to 20 kHz.
Step 1 — Set the Crossover EQ
F1: A B C D
Band 1
Parametrc
Delay
HOME > OUTPUTS > SPKR PROC > DELAY > DELAY TIME > ENTER
Step 1 — Set the Output Delay Time
F1: A B C D
Outputs > Spkr Proc > Delay
DELAY TIME
Output
A
20 dB
-60 dB
Gain Polarity
-5.5 dB POL +
Output
A
20 dB
-60 dB
Type Gain Freq BW
-35 dB 100 .01
Output
Delay:
A
14.0 ms
Bypass:
Bypassed
Press ENTER to confirm
+
Gain -100 to +20 dB
–
Polarity + or -
Type: Bypass, Parametric, Low Shelf,
High Shelf (Default Bypass)
Gain: -40 to +20 dB (Default 0.00)
Freq: 20 to 20kHz (Band 1 Def 100 Hz)
(Band 2 Def 500 Hz)
(Band 3 Def 1 kHz)
(Band 4 Def 2.5 kHz)
(Band 5 Def 5 kHz)
BW: 0.01 to 3.00 Octive
(Default 1.00 Oct.)
0.0 ms to
50.00 ms
1.0 ms increments
Bypassed or
Enabled
21
Scroll to select (Gain or Polarity)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to select
(Type, Gain, Freq, BW)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
Scroll to (Delay Time or Bypass)
To edit, press
Turn to adjust parameter
To confirm, press
To exit, press
TD-000368-00-A
ENTER
ENTER
EXIT
EN
ENTER
ENTER
EXIT
ENTER
ENTER
EXIT