QSC PLD Serie Manual De Instrucciones página 25

Utilities
HOME > UTILITIES > STATUS > ENTER
Step 1 — Check the amplifier's health
UTILITY - STATUS
Amp Total Run Time:
Hardware: V12
Firmware: V1.0.22
DC Status: OK
VRail 1: 148V
VRail 2: -150V
HOME > UTILITIES > AMP ID > ENTER
Step 2 — Name the Amplifier
UTILITY - AMP ID
Serial #: 123abc
Change Amp ID to:
m y
HOME > UTILITIES > PASSWORD > ENTER
The default password for all amplifiers is QSC - all uppercase. The password is case sensitive, can be up to 10 characters long, and contain,
A — Z a — z 0 — 9 _ - space
Step 1 — Add or change the Password
UTILITY - CHANGE PASSWORD
Current Password:
Q S C
M Y
HOME > UTILITIES > LOCKOUT > ENTER
All controls are locked except the Mute buttons, the front-panel and rear power buttons, the Enter button and Master Control knob to unlock the amplifier.
Step 2 — Enter Password to lock or unlock
UTILITY - LOCKOUT
Enter Password:
m y
22:37:48 Hrs
Temperature:
CH1 & CH3: 27C
CH2 & CH3: 29C
Power Supply: 24C
Amp ID: my amp ID
a m p I D
CONFIRM
New Password:
p a s s w o r
CONFIRM
p a s s w o r
CONFIRM
Amp Total Run Time:
HH:MM:SS
Hardware version
Firmware version
update thru Amplifier Navigator
DC Status:
VRail 1 = +147VDC +/- 5V typical
VRail 2 = -147VDC +/- 5V typical
Indicates editing
Scroll to desired letter position
Indicates "New
Turn to select desired character
Preset Name"
is selected
Up to 21 characters
A - Z / a - z / 0 - 9 /
_ / - / space
To enter "Current Password:", press
With the first letter position selected, press
Turn to select desired character
When you complete the current password,
the "New Password:" is automatically selected
Repeat the procedure for the "New Password:"
With "Enter Password:" selected, press
With the first letter position selected
Scroll to desired character
When you complete the password correctly,
To lock or unlock the amplifier, press
25
Temperature (PLD 4.3 & 4.5)
Thermal Limiting starts at 69ºC
Thermal Shutdown at 80ºC
To edit "Change Amp ID to:", press
press
press
When you are finished, press
Scroll to CONFIRM
Press
press
Scroll to CONFIRM
Press
press
press
CONFIRM is automatically selected.
TD-000368-00-A
ENTER
ENTER
ENTER
EN
EXIT
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER