Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FOREWORD
Model 28-206 is a 1 Hp, 120/240 volt, 2-speed unit with a quick blade-tensioning device and an enclosed stand.
Model 28-276 is a 3/4 Hp, 120/240 volt, 1-speed unit with a quick blade-tensioning device and an open stand.
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are are intended
to illustrate technique only.
7
8
11
1.
Band Saw
2.
Motor
3.
Table
4.
Table Insert
5.
Belt
6.
Motor Mounting Plate
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
9
10
12
1
2
3
4
5
6
7.
M8x 1.25 x 40mm (4) (for assembling saw to
stand)
8.
M8 Lockwasher (4) (for assembling saw to stand)
9.
M8 Flat Washer (4) (for assembling saw to stand)
10. M8x1.25 Hex nut (4) (for assembling saw to stand)
11. Table Knob (2)
12. M13 Flat Washer (2)
7 - English
Publicidad
Tabla de contenido
