Secure The Alarm Assembly To The Support Plate; Install The Batteries; Install The Batteries Into The Battery Tray - Schlage CONNECT Guia De Instalacion

8d Secure the Alarm Assembly to the Support Plate.
Install the lower
screw first.
Actual Size
8-32 x 1Z\,"
Please do not rotate the thumbturn at this time. It may not rotate
easily. Setup will be performed after installation is complete.
9

Install the Batteries.

9a Install the batteries into the battery tray.
1. Unsnap the connector.
2. Remove the battery tray.
3. Install four high-quality alkaline AA batteries.
L Lithium batteries may cause undesirable
operation.
4. Carefully replace the battery tray, with the
batteries facing the door.
5. Snap the connector back into place.
NOTE
ELECTROSTATIC DISCHARGE
Actual Size
8-32 x .187 UP FHMS
WARNING!
Touching the circuit board
may damage the lock!
11