Publicidad
9
Secure the mortise
9a
Secure the mortise to the door with two mounting
screws.
If necessary, drill pilot holes
for mounting screws.
Wood
#16 drill, 1.0" deep x2
Metal
#12-24, UNC-2B
9b
Rotate the lever to release the top latch.
9c
Remove the exterior lever assembly from the door.
9d
Hang the door.
10
Strikes and fire pin
10a
Prepare door frame for top strike.
If using a door seal or gasket, install first.
With door nearly closed, use straight edge to transfer location of
inside edges of top latch housing to underside of stop (a).
a
Interior
Transfer marks to underside of frame (b).
b
Exterior
With flat end of strike against stop, center strike to marks on
frame (c).
Use a pencil to trace contour of the two slotted holes (d).
Edge of stop or gasket
c
d
11
Publicidad
Capítulos
