Maytag MDB6650 Manual De Instrucciones página 8

| Controls at a Glance (continued)ooooo,,,ooooo,,°ooooo,,oo
Control Lock Option
The control touchpads can be locked to prevent unwanted
use. If this feature is activated between cycles, the dish-
washer cannot be operated until the controls are unlocked.
If desired, the controls can be locked after a cycle or delay
has started.
Setting the Control Lock:
Press the_pad for three seconds.
An indicator light above the pad will illuminate when
the controls are locked.
To Cancel:
Press the_pad for three seconds.
The indicator light will go off.
Operating Tips oooo oooo ooooo ooooo ooooo ooooo
Starting The Dishwasher
After loading the dishwasher and adding
detergent,
close the dishwasher by pressing the door until the
latch clicks.
To start the dishwasher, firmly press the desired
cycle and options pads. After a pause, the fill will
begin. To prevent unplanned cycle or option
changes, these selections are "locked in" after 1
minute.
N The indicator lights for the selected cycle and
options will glow.
To cancel an option, press the pad again. To cancel
a cycle, press the Drain/Off pad.
Adding a Forgotten item
For best cleaning, the forgotten item should be added early
in the cycle.
_ Press the Delay/Resume pad or unlatch the door.
N Wait for the water circulation to stop.
_Open the door and add the item.
Close and latch the door.
If Delay/Resume was pushed, push it again to
restart the dishwasher.
_ After five seconds, the cycle resumes automatically at
the point of interruption.
7