Screen Configuration; Setting The Day Of The Week And Time; Operation; Turning On/Off - Mitsubishi Electric Mr.SLIM PLA-RP Serie Manual De Instrucciones

3. Screen Configuration

Function Selection of remote controller
A
Standard Control Screens
OFF
B
Timer Monitor
MON
TIMER
OFF
˚F˚C
WEEKLY

4. Setting the Day of the Week and Time

TIME SUN
˚C
TEMP.
2 MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
A
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.

5. Operation

2
3
˚C
3
TEMP.
2 MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK

5.1. Turning ON/OFF

<To Start Operation>
I Press the ON/OFF button 1.
• The ON lamp 1 and the display area come on.
Note:
G When the unit is restarted, initial settings are as follows.
Remote Controller settings
Mode
Last operation mode
Temperature setting Last set temperature
Fan speed
Last set fan speed
Airflow up/down
Mode HEAT
6
Set Day/Time
TIME SUN
D C
˚F˚C
˚C
ON
C
Timer Setup
SUN MON TUE WED THU FRI SAT
B
1
Day of the Week &
Time display
˚C
9
ON/OFF
FILTER 4
CHECK TEST
OPERATION
CLEAR
6
4
5
8
˚C
7
ON/OFF
1
FILTER
CHECK TEST
1
OPERATION CLEAR
5
7 8 6
Horiz. outlet
COOL or DRY
Last setting
Horiz. outlet
FAN
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
G Function Selection of remote controller:
G Set Day/Time:
G Standard Control Screens:
G Timer Monitor:
G Timer Setup:
<How to change the screen>
A :Hold down both the Mode button and the Timer On/Off button for 2
seconds.
WEEKLY
B :Press the Timer Menu button.
C :Press the Mode (Return) button.
D :Press either of the Set Time buttons (
2
1. Press the or
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun → Mon → ... → Fri →
Sat.
3. Press the appropriate Set Time button A as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour in-
tervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
2
5
6
1
2
Set the functions and ranges available to the re-
mote controller (timer functions, operating restric-
tions, etc.)
Set the current day of the week or time.
View and set the air conditioning system's oper-
ating status
View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
or ).
3
Day of the Week Setting
TIME SUN
4
Time Setting
Set Time button A to show display 2.
3
7
3
5
6
7