Screen Configuration; Setting The Day Of The Week And Time; Operation - Mitsubishi Electric PKFY-P VAM-E Serie Manual De Instrucciones

3. Screen Configuration

Function Selection of remote controller
A
Standard Control Screens
OFF
B
Timer Monitor
MON
TIMER
OFF
˚F˚C
WEEKLY

4. Setting the Day of the Week and Time

TIME SUN
˚C
˚C
TEMP.
2
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK

OPERATION

A
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
5. Operation
2
3
˚C
3
TEMP.
2
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
All manuals and user guides at all-guides.com
Set Day/Time
TIME SUN
D C
˚F˚C
˚C
ON
C
Timer Setup
SUN MON TUE WED THU FRI SAT
B
WEEKLY
1
Day of the Week &
Time display
9
ON/OFF
FILTER 4
CHECK TEST
CLEAR
6
4
5
8
˚C
7
ON/OFF
1
FILTER
CHECK TEST
1
OPERATION
CLEAR
5
7 8 6
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
G Function Selection of remote controller:
Set the functions and ranges available to the re-
mote controller (timer functions, operating restric-
tions, etc.)
G Set Day/Time:
Set the current day of the week or time.
G Standard Control Screens:
View and set the air conditioning system's oper-
ating status
G Timer Monitor:
View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
G Timer Setup:
Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
<How to change the screen>
A :Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B :Press the Timer Menu button.
C :Press the Mode (Return) button.
D :Press either of the Set Time buttons (
3
Day of the Week Setting
2
TIME SUN
1. Press the or Set Time button A to show display 2.
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at 3 : Sun → Mon → ... → Fri →
Sat.
3. Press the appropriate Set Time button A as necessary to set the time.
* As you hold the button down, the time (at 4) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour in-
tervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
5.1. Turning ON/OFF
<To Start Operation>
I Press the ON/OFF button 1.
• The ON lamp 1 and the display area come on.
Note:
G When the unit is restarted, initial settings are as follows.
Remote Controller settings
Mode
Last operation mode
Temperature setting Last set temperature
Fan speed Last set fan speed
Airflow up/down Mode HEAT
or ).
4
Time Setting
Horiz. outlet
COOL or DRY
Last setting
Horiz. outlet
FAN
5