JVC CS-DA1 Manual De Instrucciones página 16

[Connecting to 5.1ch subwoofer output]
Set the LPF switch to
AOFFB.
L-shaped
pin plug
relay cord
NOTES:
• Set the subwoofer output level of the car stereo to the maximum and use the remote control to
adjust the volume of the unit. (However, when the sound of the unit becomes distorted, lower the
subwoofer output level at the 5.1ch decoder.)
• When the subwoofer output is 1 channel, connect to Lch. Insulate plugs that are not used with
vinyl tapes.
12
When no remote output is equipped for
your car receiver, connect to the ACC
power.
CS-DA1
Power cord
Blue/White
Remote input
TO
REMOTE
OUT
TO
SPEAKER
INPUT
This is not used when LINE IN
terminal is used.
Speaker
input
POWER LEAD
GROUND
ACC power cord
Crimp connector
Remote output
Pin cord (not supplied)
5.1ch subwoofer output
Fuse
15A
Black
Remote controller
JVC Car
receiver, etc.
Yellow
Connect only to the plus +
side of the battery.
Connect to the metal part
(such as the chassis) of the
car.