Changing Fuse - JVC CS-DA1 Manual De Instrucciones

Note
To prevent failure due to excessive input of bass tone and deafening sound, use this unit under the
following conditions.
• Use the tone control for the connected car stereo under flat condition.
Loudness control: OFF
BASS: Flat
Graphic equalizer: Set bass to flat
• When using the speaker input terminal, connect to a car stereo or power amplifier with output
60W and below for each channel.
• When the line output or subwoofer output of the car stereo exceeds 2 V, switch the INPUT ATT.
switch to AONB.
Maintenance
• Use a soft, dry cloth to wipe off any dirt on the surface.
• Coating on the unit may come off and change color if it comes into contact with car wax or volatile
liquids such as alcohol, thinner or gasoline.

Changing fuse

• The fuse of this unit is 15 A.
If the fuse blows out soon even after replacing, please consult our authorized dealers.
4
Fuse (15 A)
Radio pliers