Serial Numbers; Cleaning And Maintenance - Peg-Perego booklet Instrucciones De Uso

Ocultar thumbs Ver también para booklet:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

harness remove the shoulder pads (fig_a). To
adjust the height, slip the belts through the
eyelet in the fabric (fig_b) and position them
in the most suitable eyelet.
17 FOLDING UP: To fold the stroller, it is best to
set the front wheels to their fixed position
and close the hood (if fitted). Place the handle
as shown in the figure (fig_a).
Pull the inside handle on the base (fig_b) and lift
it (fig_c); the handle will drop forward until the
frame is closed.
18 To close correctly, check the side hook is
inserted (fig_a). If not automatically locked,
compress the chassis slightly. When folded,
the stroller will free standing (fig_b).
19 For greater compactness, it is possible to
remove the wheels.
To remove the rear wheels: pull the pivot
outwards and remove the wheel as shown in
the figure (fig_a).
To remove the front wheels: press the tab as
shown, and remove the wheel (fig_b).
TRANSPORT: the stroller can be carried
comfortably locking the front wheels and
grasping the main handle (fig_c).
20 REMOVABLE ITEMS: to remove the hood, take
the elastic off from the buttons on the inside
of the handlebar (fig_a), detach the press
studs the sides of the chassis (fig_b), detach
the Velcro strip from the backrest (fig_c) and
remove the attachments of the hood from
their positions on the chassis (fig_d).
21 To remove the seat fabric, press in the holes
on the inside of the chassis (fig_a); remove,
from the side of the seat, the rigid flap of the
chassis fabric ((fig_b), unfasten the elastic
of the net from the side buttons inside the
handlebar (fig_c) and unfasten the elastics
from the buttons inside the chassis (fig_d).
22 From the front, remove the lining from the
foot platform (fig_a), remove the leg divider
strap from under the seat (fig_b), unbutton
the seat fabric (fig_c), unscrew the waist belt
on the side (fig_d) and remove the seat fabric
from the backrest (fig_e).
GANCIOMATIC SYSTEM
The Ganciomatic System is the quick,
practical system that allows you to fasten the
Primo Viaggio 4•35 car seat (sold separately)
onto the stroller using the Ganciomatic
hooks.
23 GANCIOMATIC HOOKS ON THE STROLLER: to
lift the stroller's Ganciomatic hooks, pull back
the fabric at the corners of the seat.
Lift the two Ganciomatic hooks which will
automatically move outwards.
_ To lower the hooks, proceed in the opposite
order.
GANCIOMATIC FASTENING
24 Booklet + Primo Viaggio 4•35
To attach the car seat to the stroller, you
must:
_ Lock the stroller brakes;
_ Lift the stroller's Ganciomatic hooks:
_ Lower the backrest completely;
_ Position the car seat, mum-facing, on the
Ganciomatic hooks and press down until they
click.
_ When the car seat has been fastened, adjust
the backrest to the maximum height position.
_ To release the car seat from the stroller please
read the instructions book

SERIAL NUMBERS

25 Information about the production date can
be found on the Booklet .
_ The product name, production date and serial
number of the chassis.
This information is required for any
complaints.
ACCESSORIES
26 RAIN COVER: can be fastened to the hood
(fig_a).
MOSQUITO NETTING: can be fastened to the
hood (fig_b).
COVER: Can be applied onto the leg rest
(fig_c).
27 BAG: diaper-changing bag with pad for
changing baby's diaper (fig_a).
CUP HOLDER: may be attached to the
mushroom button on the frame of the
stroller (Fig. b).
PADDED CUSHION for Peg Perego high chairs
and strollers. Winter side made with cozy
matelassé jersey and summer side made with
100% cotton (fig_c).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged
and continuous exposure to bright sunlight
may give rise to colour changes of various
different materials; store this product in a dry
place.
CLEANING THE SEAT: periodically clean all
plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep
all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms,
locking mechanisms, wheels, ...) and free of
dust and sand and, if necessary, lubricate with
light machine oil.
CLEANING THE RAIN CANOPY: wash with
a sponge and soapy water; do not use
detergents.
CLEANING FABRIC PARTS: brush fabric parts
to remove dust and wash by hand at a
maximum temperature of 30°C; do not wring;
- 14 -

Publicidad

Tabla de contenido
loading

Tabla de contenido