Care; Maintenance - Kemper ProfiMaster Manual De Uso

7.1 Care

Caring for the ProfiMaster device is essentially limited to cleaning of all surfaces from
dust and deposits and checking of the filter elements.
Pay attention to warning notices specified in Section 2.5 "Safety Instructions for
Maintenance and Troubleshooting."
Note
Do not clean the ProfiMaster device with compressed air! Dust and dirt
could get into the ambient air.
Reasonable care will facilitate maintaining the ProfiMaster device in working order.
Clean the ProfiMaster device thoroughly once a month.
●
The ProfiMaster device external surface can be cleaned using a suitable vacuum
●
cleaner of dust class H or alternatively wiped with a damp cloth.
When cleaning the exhaust arm, also remove the accumulated dust or other
●
deposits on the protective grid (optional accessory), or inside the exhaust nozzle
respectively.
Check the hose of the exhaust arm for damage such as spark holes or worn
●
spots.
Note
Extensive damage and leaks lead to poor exhaust performance
through the extraction nozzle. Replace the damaged hose with a
new one in time.

7.2 Maintenance

The safe operation of the ProfiMaster device is positively influenced by regular
inspections and maintenance that should be performed at least once a year.
Except for occasional additional setting of the extraction arm joints and possibly
necessary replacement of the filter, the unit is maintenance-free. Additional joint
setting should be performed taking into account the instructions for installation and
maintenance attached to the extraction arm.
Pay attention to warning notices specified in Section 2.5 "Safety instructions for
maintenance and troubleshooting."
Product number: 150 2464
Technical changes and errors reserved.
KEMPER ProfiMaster Instruction Manual - EN
- 60 - rev.: 2
Status as of: 05/2015