Kemper ProfiMaster Manual De Uso página 68

KEMPER ProfiMaster Instruction Manual - EN
Disassembly works must be carried out with utmost care to avoid stirring up dust
adhering onto the ProfiMaster device and injury to unauthorized personnel.
Therefore, it is necessary to disassemble the device in a well-ventilated room with
filtered exhaust air or a suitable mobile filtration device. The work area should be
separated/marked. Raised dust should be immediately extracted by vacuum cleaner
of dust class H.
During the work it is necessary to use personal protective equipment such as
protective clothing, gloves and breathing apparatus with incorporated fan, etc., so as
to avoid contact with hazardous dust.
Before disassembly the unit must be cleaned and freed of all dust. This should be
achieved using an industrial vacuum cleaner of dust class "H".
At the beginning of the disassembly the embedded filters are removed and disposed
in an enclosed plastic bag. Then the loose dust is extracted during the disassembly.
Individual parts can then be divided by material and disposed by an authorized
company.
Finally, it is necessary to clean the work area.
Product number: 150 2464 - 67 - rev.: 2
Technical changes and errors reserved. Status as of: 05/2015