Local And Remote Configuration; User Interfaces - Fujitsu Control 4 Serie Guia Del Usuario

3.

Local and Remote Configuration

3.1

User interfaces

The KVM s4 switch comes equipped with two "point-and-click" interfaces: a local
user interface (local UI) and a remote on-board web interface (OBWI). Using the
configuration options provided by these interfaces, you can tailor the switch to
your specific application, control any attached devices, and handle all basic KVM
or serial switch needs.
The local UI and remote OBWI are almost identical. Unless specified, all information in
this chapter applies to both interfaces.
From either interface, you can launch two different kinds of sessions:
• The Video Viewer window allows you to control the keyboard, monitor, and
mouse functions of individual target devices connected to the switch in real
time. You may also use predefined global macros to perform actions within
the Video Viewer window. For instructions on how to use the Video Viewer,
see Chapter 4.
• The serial viewer window allows you to manage individual target devices
either by using commands or scripts.
Local UI
The switch includes a local port on the back. This port enables you to connect a
keyboard, monitor and mouse directly to the switch and use the local UI.
You can choose any of the following keystrokes to be configured to open the
local UI or to switch between the local UI and an active session: Print Screen,
Ctrl + Ctrl, Shift + Shift, and Alt + Alt.
To launch the local UI:
1. Connect your monitor, keyboard and mouse cables to the switch. For more
information, see "Connecting the switch hardware" on page 11.
2. Press any of the enabled keystrokes to launch the local UI.
3. If local UI authentication has been enabled, enter your username and
password.
590-1058-640A
19