Fujitsu Control 4 Serie Guia Del Usuario página 59

4. The Video Viewer
Table 4.2: Descriptions for Figure 4.2
Number Description
Image Capture
1
Width
Pixel
2 Sampling/Fine
Adjust
Image Capture
3 Horizontal
Position
Image Capture
4
Vertical Position
5 Contrast
6 Brightness
Block Noise
7
Threshold
2. Click the icon corresponding to the feature you wish to adjust.
3. Move the Contrast slider bar and then fine-tune the setting by clicking the
Min (-) or Max (+) buttons to adjust the parameter for each icon pressed. The
adjustments display immediately in the Video Viewer window.
4. When finished, click Close to exit the Manual Video Adjust dialog box.
Target video settings
The Image Capture Width, Pixel Sampling/Fine Adjust, Image Capture Horizontal
Position and Image Capture Vertical Position adjustments affect how the target
video is captured and digitized. They are seldom changed.
The image capture parameters are automatically changed by the Automatic
Adjustment function. A special image is required on the target in order to make
accurate adjustments independently.
54
Number Description
8 Pixel Noise Threshold
9 Automatic Video Adjustment
10 Refresh Image
11 Adjustment bar
12 Video Test Pattern
13 Performance Monitor
14 Close button
590-1058-640A