Fujitsu Control 4 Serie Guia Del Usuario página 49

3. Local and Remote Configuration
Prioritized status of target devices
On the Target Devices page, a target with linked power outlets controls multiple
devices. The Status value displayed for a target is chosen as the highest priority
of all the status values of the devices. The following table shows the possible
status values in priority order (highest to lowest) and the applicable target device
types.
Table 3.7: Target Status Values
Status Value
In Use
Path Blocked
Upgrading
Powering On
Powering Off
No Power
Partial Power
Locked-Off
Powered Off
Locked-On
Idle
Powered On
When a target device has multiple power outlets linked by name and they do not
have a common power state, the appliance may consider the Locked-Off outlet
status as Off, and the Locked-On outlet status as On. The following table lists the
resulting Status values for combinations of two outlet status values.
44
Applicable for:
Adapter Power
Cable Outlet
x N/A
x N/A
x N/A
N/A x
N/A x
x N/A
N/A x
N/A x
N/A x
N/A x
x N/A
N/A x
Status Description
A session is active
Path to Target is in use by another session
The adapter cable is being upgraded
One or more outlets are powering on
One or more outlets are powering off
No power detected on the adapter cable
Target has outlets in both on and off states
One or more outlets are locked on
One or more outlets are powered off
One or more outlets are locked off
No session active; the adapter cable has
power
Outlets are powered on
590-1058-640A