Fujitsu Control 4 Serie Guia Del Usuario página 41

3. Local and Remote Configuration
Operation
Change your
own password
Access target
device
To add a new user account (administrator only):
1. On the side navigation bar, select Unit View > Appliance > Appliance
Settings > User Accounts > Local Accounts to open the Appliance Local User
Accounts screen.
2. Click the Add button.
3. Enter the name and password of the new user in the blanks provided.
4. Select the preemption and access levels for the new user.
5. Select any of the available target devices that you wish to assign to the user
account and click Add.
User administrators and appliance administrators can access all target devices.
6. Click Save.
To delete a user account (administrator only):
1. On the side navigation bar, select Unit View > Appliance > Appliance
Settings > User Accounts > Local Accounts to open the Appliance Local User
Accounts screen.
2. Click the check box to the left of each account that you wish to delete, then
click Delete.
To edit a user account (administrator or active user only):
1. On the side navigation bar, select Unit View > Appliance > Appliance
Settings > User Accounts > Local Accounts. The Appliance Local User
Accounts screen is displayed.
2. Click the name of the user you wish to edit. The user profile will appear.
3. Fill out the user information on the screen, then click Save.
36
Appliance User
Administrator Administrator
Yes Yes
Yes, all target Yes, all target
devices devices
Access Level
Users
Yes
Yes, if allowed
590-1058-640A