Tabla de contenido
Publicidad
Etiquetas
NOTA: La etiqueta real puede variar según el modelo de láser.
Número de serie
Responsibility for Validation and Fitness-of-Use:
Because Valmark Industries, Inc. has no controlover the use or application of
(panel trasero)
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
the layout and consistent fabrication of high quality, reliable membrane switch,
custom graphics and labeling products. Valmark and its employees do NOT
purport to be experts in the end-use application of our customers, or the
environments in which these products will be stored and/or used.
Conexión a tierra
(parte inferior del láser)
Responsibility for Validation and Fitness-of-Use:
Because Valmark Industries, Inc. has no controlover the use or application of
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
REF
31602
the layout and consistent fabrication of high quality, reliable membrane switch,
EC REP
custom graphics and labeling products. Valmark and its employees do NOT
SN
110001F
purport to be experts in the end-use application of our customers, or the
Emergo Europe
environments in which these products will be stored and/or used.
FCC ID: UDB31539
Molenstraat 15
2513 BH The Hague
IC ID: 6590A-31539
The Netherlands
Tel:(31) (0) 70 345-8570
Fax: (31) (0) 70 346-7299
Receptor inalámbrico
0086
LABEL P/N: 31792-1F
NOTES:
1
LABEL PERIPHERY (keyline does not print)
2
BACKGROUND: BLACK
3
GRAPHICS: Blue PMS 285C
4
GRAPHICS: WHITE
Control remoto
APPROVAL
OK AS IS
SIGNATURE
15510-ES rev. G
THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH
PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE
RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE
PRODUCTION RUN. (1) Valmark may, at its discretion unless
otherwise noted, substitute any materials or BOM components
with equivalent or similar materials and/or components based on
control of cost or availability
3
Pedal
1212 Terra Bella Avenue
Mountain View, CA 94043 USA
Tel: 650-940-4700
Fax: 650-940-4710
www.iridex.com
MADE IN THE USA
THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH
PRODUCTION. ACCEPTANCE OF THE BELOW ART SAMPLE
RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE
PRODUCTION RUN. (1) Valmark may, at its discretion unless
31602
otherwise noted, substitute any materials or BOM components
110001R
with equivalent or similar materials and/or components based on
control of cost or availability
0086
RESUBMIT WITH
APPROVED WITH
CORRECTIONS
CORRECTIONS
CONSTRUCTION:
BASE MATERIAL
.010 8B35
ADHESIVE
3M 468
IPX1
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE:
TOOLING:
DECIMALS
.XX ±0.01"
.XXX ±0.010"
GRAPHICS:
DECIMALS
.XX ±0.02"
.XXX ±0.015"
THIRD ANGLE PROJECTION
Customer Supplied Prints
Dimensional
Graphics
Modifications
Rev.
ECO #
REF
31602
EC REP
110001F
SN
Emergo Europe
FCC ID: UDB31539
Molenstraat 15
®
2513 BH The Hague
IC ID: 6590A-31539
The Netherlands
Tel:(31) (0) 70 345-8570
Fax: (31) (0) 70 346-7299
0086
LABEL P/N: 31792-1F
CENTER GRAPHICS
APPROVAL
OK AS IS
SIGNATURE
LABEL P/N: 31792-2F
IQ Family Remote Control
65777
RC0100
65891C
DATE
7900 National Dr. Livermore, CA 94550
www.nidec-vis.com
Phone (925) 960-9900
Fax (925) 960-0900
ANGLES
TITLE:
±0.5º
GRAPHIC OVERLAY
ANGLES
DR BY:
DATE:
01/03/17
DW
±0.5º
APP BY:
DATE:
SCALE:
1:1
APPROVAL PRINT
SHEET:
1 OF 1
Part Number
Date
Description
Date
31602
110001R
0086
DATE
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCE:
TOOLING:
DECIMALS
ANGLES
.XX ±0.01"
.XXX ±0.010"
±0.5º
GRAPHICS:
DECIMALS
ANGLES
.XX ±0.02"
.XXX ±0.015"
±0.5º
THIRD ANGLE PROJECTION
Seguridad y conformidad 35
CUSTOMER:
IRIDEX
PART NUMBER:
31792
REV:
F
Customer Supplied Prints
Part Number
Dimensional
Graphics
Modifications
Rev.
ECO #
Description
Customer Supplied Prints
Dimensional
LABEL P/N: 31792-2F
Graphics
Modifications
Rev.
ECO #
7900 National Dr. Livermore, CA 94550
www.nidec-vis.com
Phone (925) 960-9900
Fax (925) 960-0900
TITLE:
GRAPHIC OVERLAY
DR BY:
DATE:
CUSTOMER:
01/03/17
DW
APP BY:
DATE:
PART NUMBER:
SCALE:
1:1
APPROVAL PRINT
SHEET:
1 OF 1
Date
Date
Part N
Descri
IRIDEX
31792
REV:
F
Publicidad
Tabla de contenido
